Meyer Sound QuickFly Especificações descarregar pdf (Página 18)

MG-MICA MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.147.034.01 A

Page 18 of 44

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

In order to give a visual representation and help to make modiﬁcations to the array’s conﬁguration, the COG and where

it falls in the grid can be displayed in the sound ﬁeld.

Please follow the next steps to see the COG graphically displayed::

1. If not active, Go to View > Array COG (Center of Gravity) and place a check mark next to it. You will see a magen-

ta line that goes from the center of gravity of the array to the top of the sound ﬁeld. Refer to Figure 4.8.

2. Click the Zoom button along the top right of the Sound Field, and left-click and hold while drawing a box around

the top of the grid. You will see the three Zones marked in different colors Zone 1 (Green), Zone 2 (Yellow), Zone 3

(Orange). Refer to Figure 4.9.

3. As you change the splay and grid angle, check the results by zooming into the top of the grid and/or checking the

zone information in Center of Gravity in the table at the bottom of Edit Loudspeaker System.

Repeat until the conditions needed to meet the load rating and safety factor requirements are met.

Figure 4.8. Center of Gravity displayed on the sound ﬁeld

(vertical magenta line)

Figure 4.9. MG-MICA grid’s zones (zoomed view)

Zone 1

Zone 3

Zone 2 Zone 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Sem comentários

Meyer Sound QuickFly Especificações Página 18