Meyer Sound QuickFly Especificações descarregar pdf (Página 20)

MG-MICA MULTIPURPOSE GRID AND ACCESSORIES

PN: 05.147.034.01 A

Page 20 of 44

Meyer Sound Laboratories Inc.

www.meyersound.com

T: +1 510 486.1166

F: +1 510 486.8356

Table 3. Load Rating if Center of Gravity falls in Zone 1

Factor of Safety

Front Flown Position Rear Flown Position

FS5

FS7

FS5

FS7

Total Suspended Weight

3875 lbs

(1,761 kg)

3410 lbs

(1550 kg)

3875 lbs

(1,761 kg)

3410 lbs

(1550 kg)

MICA Equivalent Cabinets

25 22 25 22

Maximum Grid Tilt

-4º to +4º -4º to +4º -4º to +4º -4º to +4º

NOTE: In order to achieve the ratings in Table 3 (25 MICA loudspeakers with a 5:1 safety factor or 22

MICA loudspeakers with a 7:1 safety factor ), the following conditions need to be met:

■ The grid tilt angle cannot be greater than the angles in the table with respect to the horizontal.

Negative angles are downtilt and positive angles are uptilt angles.

■ The array is not pulled from points other than the ones on the MG-MICA grid.

■ No pull-back motor is used for tilting the array.

■ The optional MGCP-MICA center point rigging beam is not used.

■ The center of gravity of the array must be located in Zone 1. MAPP Online Pro must be used to

ﬁnd out this information.

Loads must be monitored using load cell sensors to show that the total rigging load at the front or

rear of the grid does not exceed 2541 lbs (1155 kg) for 5:1 safety factor or 1815 lbs (825 kg) for

7:1 safety factor.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Sem comentários

Meyer Sound QuickFly Especificações Página 20